This time I will introduce a kind
of bicycle taillight to you which is called bicycle
steering electric taillight. It has all kind of functions. Want to
know more about this light, please see the detail introduction as follows.
It is brand new and has high
quality. It has 5 super bright LED and with 3 mode. It powered by AA batteries.
It is light weight, high strength and waterproof. Its led working life is about
100000 hours. This bicycle
steering electric taillight is acted as a host and tail connected
set with one screw. This section should have shelves to install. With no
shelves it will not be installed. It is about 210 g containing small packing weight. The length
between host and tail is about 232cm,
please pay attention to your car’s actual situation when you want to buy it in
order to avoid home line’s short problem. When you install brake switch, please
adjust the distance in order to avoid the problem that the distance is too
short and too much brake make the braking switch bad. Please test it before you
ride on the normal road. The package includes 1 XC-604 multifunctional bicycle
steering lamp, 1 bicycle taillight, 1 electric horn and one brake lamp bell.
Now I will tell you how to
install this steering
electric taillight. First please pay attention to the physical
line. Then check the shelves whether they have holes. They can be arranged with
holes. If they have no holes, they cann’t be installed. The brake switch should
be mounted and put it on the rear brake. Finally the taillights control device
is installed on the handlebar. Please
note that this section can only be installed in the shelf above.
没有评论:
发表评论